Stiebel Eltron Mini-E 2.5-1
0.97 UEF DOE CCD · 2026-09-19Grade E: where this UEF sits among the 271 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tankless unit, very small draw pattern (small units - a single bathroom, or a point-of-use heater under a sink).
If you are checking the Stiebel Eltron Mini-E 2.5-1, this electric tankless unit uses 609 kWh of electricity a year. That figure applies to the very small draw pattern, the standard daily hot-water usage DOE tests against. It sits 6 kWh below the 615 kWh median of its class.
Energy use per year
609 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 615 kWh for the 271 models registered in the same heater type and draw pattern; it ranks 37 of 271, lowest energy first.
Solid line: this model (609 kWh). Dashed line: the class median.
Min 562 kWh Median 615 kWh Max 649 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.97 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tankless unit at the very small draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Very small DOE CCD · 2026-09-19
- Maximum Gallons Per Minute how many gallons a minute it can heat while running continuously
- 0.2 gal/min DOE CCD · 2026-09-19
What it costs to install
$1,309–$1,862 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
How to size a tankless water heater by GPM
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All electric tankless water heaters
Electric instantaneous units, sized by flow rate rather than tank gallons.
-
Every Stiebel Eltron model on file
What this brand files, by heater type.
UEF 0.97 · Grade E Price it on your ZIP
This site calculated the 609 kWh figure; the registry does not list it. It combines the registry's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the very small draw pattern. For the Mini-E 2.5-1, the UEF is 0.97. The source data comes from the DOE CCD, retrieved 2026-09-19. The figure holds only at the federal test's daily draw. At a different daily draw, it does not apply, and this page has no figure for that case. The steps behind the calculation are set out in how this site calculates annual energy and cost.
The class for this comparison is the 271 models registered as an electric tankless unit at the very small draw pattern. Within that class, the Mini-E 2.5-1 ranks 37th lowest for energy use. Its 609 kWh sits 6 kWh below the class median of 615 kWh. The very small draw pattern covers small units: a single bathroom, or a point-of-use heater under a sink. The unit's maximum flow rate in gallons per minute is 0.2. A home that needs hot water at several fixtures at the same time is outside this draw pattern, and this class comparison does not cover it. To check a like-for-like swap, use find a same-class replacement by model number. For other sizes, use the water heater selector by fuel, space and size.
The running cost is not stated in this text. It depends on your own utility's electricity tariff, so the page calculates it from your ZIP instead of estimating it. The input is the same 609 kWh at the very small draw pattern; only the rate changes. You can run that figure in the cost calculator on your own ZIP. The installed price range is shown in its own block, with its source and date. It is a modeled installed-cost range, not a quote. The running cost at a daily draw above the federal test's is not available on this page.
DOE CCD · 2026-09-19