Stiebel Eltron Mini-E 2-1
0.97 UEF DOE CCD · 2026-09-19Grade E: where this UEF sits among the 271 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tankless unit, very small draw pattern (small units - a single bathroom, or a point-of-use heater under a sink).
If you are verifying this model's registry figures: the Stiebel Eltron Mini-E 2-1 uses 609 kWh of electricity a year. That figure holds for the very small draw pattern, the standard daily hot-water usage DOE tests against. It sits 6 kWh below the median of 615 kWh for its class of electric tankless units.
Energy use per year
609 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 615 kWh for the 271 models registered in the same heater type and draw pattern; it ranks 37 of 271, lowest energy first.
Solid line: this model (609 kWh). Dashed line: the class median.
Min 562 kWh Median 615 kWh Max 649 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.97 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tankless unit at the very small draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Very small DOE CCD · 2026-09-19
- Maximum Gallons Per Minute how many gallons a minute it can heat while running continuously
- 0.3 gal/min DOE CCD · 2026-09-19
What it costs to install
$1,309–$1,862 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
How to size a tankless water heater by GPM
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All electric tankless water heaters
Electric instantaneous units, sized by flow rate rather than tank gallons.
-
Every Stiebel Eltron model on file
What this brand files, by heater type.
UEF 0.97 · Grade E Price it on your ZIP
This site calculated the 609 kWh figure; it is not taken directly from the registry. The figure combines two inputs. The first is the registry's UEF, the ratio of hot water delivered to energy used. The second is the DOE test's daily hot-water draw. At the very small draw pattern, this model's UEF is 0.97, from the DOE CCD as retrieved on 2026-09-19. The annual figure applies only at that test draw. A household that uses more or less hot water than the test assumes will use a different amount of electricity. The registry data does not show how far real use differs from the test figure. The steps are set out in how the annual cost is calculated.
The registry lists 271 models as an electric tankless unit at the very small draw pattern. This model ranks 37th lowest in energy use among them. That places it in the lowest quarter of its class, which matches the gap to the median given above. The very small draw pattern covers small units: a single bathroom, or a point-of-use heater under a sink. The registry lists this model's maximum flow rate in gallons per minute as 0.3. The 609 kWh figure describes a household whose hot-water use matches that tested scope. To check other units in the same class, use the same-class replacement search by model number.
The rating does not cover a flow need above 0.3, the registry's listed maximum for this model. Hot-water use across several bathrooms falls outside the very small draw pattern, so the 609 kWh figure would not describe it. For those needs, the selector by fuel, space and size lists other classes. The running cost is not written here because it depends on your own utility electricity tariff. The page calculates it from your ZIP, using 609 kWh at the test draw. Without your rate, no running cost for this model is available. The installed-cost range in its own block is a modeled range, not a quote.
DOE CCD · 2026-09-19