DoesTheMath

RINNAI (RX160I) REU-NB2530FF-US

0.97 UEF DOE CCD · 2026-09-19
A

Grade A: where this UEF sits among the 397 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set

A gas tankless unit, high draw pattern (a larger household, or one where showers and laundry overlap).

If you are verifying the RINNAI (RX160I) REU-NB2530FF-US, a gas tankless unit, it uses 175 therms of natural gas a year. That figure belongs to the high draw pattern, the standard daily hot-water usage DOE tests against. It sits 7 therms below the 182 therms median of the 397 gas tankless models registered at that pattern.


Energy use per year

175 therms a year

Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the natural gas rate where you live.

That is below the median of 182 therms for the 397 models registered in the same heater type and draw pattern; it ranks 11 of 397, lowest energy first.

This model: 175 therms

Solid line: this model (175 therms). Dashed line: the class median.

Min 173 therms Median 182 therms Max 209 therms

DOE CCD · 2026-09-19

Report an issue with this number


What it costs to run where you live

Enter your ZIP to see what this unit costs to run a year at your state’s average natural gas price.


What the registry files

UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
0.97 DOE CCD · 2026-09-19 Compared only with other models registered as a gas tankless unit at the high draw pattern.
Draw Pattern the standard daily usage profile DOE tests the unit against
High DOE CCD · 2026-09-19
Maximum Gallons Per Minute how many gallons a minute it can heat while running continuously
4.6 gal/min DOE CCD · 2026-09-19
On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
2024-03-01 ENERGY STAR · 2026-09-19
Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
No ENERGY STAR · 2026-09-19

What it costs to install

$2,452–$3,515 installed

Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.

Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.

NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01

Report an issue with this number


Safety record

No CPSC recall names this model.

Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.

CPSC · 2026-09-24

Does it fit your space?

Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.

Dimensions (ENERGY STAR)
the unit's filed height, width, depth or tank diameter, in inches
Input voltage and maximum current (ENERGY STAR)
the circuit voltage the unit is certified on and the most current it draws
Vent type and size (ENERGY STAR)
how a gas unit is vented, the vent's diameter and the height of its vent connector
  • Physical footprintEnter your numbers25.8" H × 18.5" W × 11.4" D × 11.4" ⌀
  • Electrical supplyEnter your numbers4A max
  • Vent compatibilityEnter your numbersPower Direct Vent, 2" vent, 25.8" to vent
ENERGY STAR · 2026-09-19

What these figures mean

The 175 therms figure is computed by this site, not taken from the registry. It combines the registry's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the high pattern. This model's UEF is 0.97. The registry value comes from DOE CCD, retrieved 2026-09-19. Among the 397 gas tankless models at the high draw pattern, this unit has the 11th lowest energy use. That places it in the lowest quarter of its class for energy use. Each step behind the figure is set out on the page explaining how the annual cost is calculated.

The 175 therms figure assumes the high draw pattern, which fits a larger household, or one where showers and laundry overlap. The registry lists this unit's maximum flow rate in gallons per minute as 4.6. A household that draws less hot water each day than the DOE test assumes will use a different amount of gas. This page does not have that amount. Energy use at other draw patterns is not available in the data for this model. If you are comparing units of other fuels or sizes, the water heater selector by fuel, space and size covers those classes.

The running cost is not written in this text. It depends on your state's average residential natural gas price. For that reason, the page applies the price for your ZIP to the 175 therms figure. Homes with the same unit and the same high-pattern use can therefore pay different amounts. To see your own figure, use the cost calculator on your own ZIP. The installed price range appears in its own block with its source and date. It is a modeled installed-cost range, not a quote. To check other units in this class against the 182 therms median, you can find a same-class replacement by model number.

DOE CCD · 2026-09-19

How this compares

The closest models in the same class — same fuel, type and draw pattern.


Keep going

UEF 0.97 · Grade A Price it on your ZIP