Richmond RTGH-S10I
0.96 UEF DOE CCD · 2026-09-19Grade A: where this UEF sits among the 397 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
A gas tankless unit, high draw pattern (a larger household, or one where showers and laundry overlap).
This gas tankless Richmond RTGH-S10I uses 176 therms of natural gas a year at the high draw pattern, the standard daily hot-water usage DOE tests against. If you are checking a listing or a quote, that figure sits 6 therms below the 182 therms median of the 397 models in its class, the 12th lowest.
Energy use per year
176 therms a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the natural gas rate where you live.
That is below the median of 182 therms for the 397 models registered in the same heater type and draw pattern; it ranks 12 of 397, lowest energy first.
Solid line: this model (176 therms). Dashed line: the class median.
Min 173 therms Median 182 therms Max 209 therms
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.96 DOE CCD · 2026-09-19 Compared only with other models registered as a gas tankless unit at the high draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- High DOE CCD · 2026-09-19
- Maximum Gallons Per Minute how many gallons a minute it can heat while running continuously
- 5.2 gal/min DOE CCD · 2026-09-19
- On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
- 2024-09-01 ENERGY STAR · 2026-09-19
- Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
- No ENERGY STAR · 2026-09-19
What it costs to install
$2,405–$3,460 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24Does it fit your space?
Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.
- Dimensions (ENERGY STAR)
- the unit's filed height, width, depth or tank diameter, in inches
- Input voltage and maximum current (ENERGY STAR)
- the circuit voltage the unit is certified on and the most current it draws
- Vent type and size (ENERGY STAR)
- how a gas unit is vented, the vent's diameter and the height of its vent connector
What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
How to size a tankless water heater by GPM
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All gas tankless water heaters
Gas-fired instantaneous units, sized by flow rate rather than tank gallons.
-
Every Richmond model on file
What this brand files, by heater type.
UEF 0.96 · Grade A Price it on your ZIP
The 176 therms figure is calculated by this site, not taken from the registry. It combines the registry's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the high draw pattern. For this model the UEF is 0.96, and the source is the DOE CCD, retrieved 2026-09-19. The result holds only at the federal test's daily draw. If your household uses more or less hot water, your yearly gas use will differ from 176 therms by an amount this page does not know. Each step is set out in how this site calculates annual energy and cost.
The high draw pattern describes a larger household, or one where showers and laundry overlap. So the class comparison covers only the 397 gas tankless models registered at that pattern. Within that group, its 12th place puts it in the lowest quarter for energy use. The registry lists its maximum flow rate in gallons per minute as 5.2. For a smaller household with fewer overlapping draws, the 176 therms figure is not the right reference, and this page shows no figure for a lower draw pattern. A home without a natural gas supply falls outside this class. To compare other units in the same class, find a same-class replacement by model number.
No running cost appears in this text, because it depends on your state's average residential gas price. The page calculates that cost from your ZIP instead of estimating it here. The 6 therms gap below the class median is a difference in energy; what it is worth in money also depends on that rate. The installed price range is shown in its own block with its source and date. It is a modeled installed-cost range, not a quote. To turn 176 therms into a yearly cost at your own rate, use the water heater cost calculator for your ZIP. This page does not know the actual use in your home, so the result is still an estimate at the test's draw.
DOE CCD · 2026-09-19