Richmond PROPH80 T2 RH375-SO
4.07 UEF DOE CCD · 2026-09-19Grade B: where this UEF sits among the 194 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tank, high draw pattern (a larger household, or one where showers and laundry overlap).
If you are checking the Richmond PROPH80 T2 RH375-SO, it uses 1,219 kWh of electricity a year at the high draw pattern, the standard daily hot-water usage DOE tests against. That is 87 kWh below the 1,306 kWh median for the 194 electric tank models at that pattern. It ranks 14th lowest.
Energy use per year
1,219 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 1,306 kWh for the 194 models registered in the same heater type and draw pattern; it ranks 14 of 194, lowest energy first.
Solid line: this model (1,219 kWh). Dashed line: the class median.
Min 1,002 kWh Median 1,306 kWh Max 5,334 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 4.07 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the high draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- High DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 87 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 72 gal DOE CCD · 2026-09-19
- On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
- 2023-03-31 ENERGY STAR · 2026-09-19
- Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
- No ENERGY STAR · 2026-09-19
- Refrigerant and GWP (ENERGY STAR) the refrigerant a heat pump unit uses and its global warming potential, a leak's climate effect relative to carbon dioxide (CO2 = 1)
- R-134a, GWP 1430 ENERGY STAR · 2026-09-19
What it costs to install
$3,936–$4,975 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24Does it fit your space?
Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.
- Compressor operating range (ENERGY STAR)
- the air temperatures around the unit in which its heat pump runs; outside this range the heat pump stops
- Dimensions (ENERGY STAR)
- the unit's filed height, width, depth or tank diameter, in inches
- Input voltage and maximum current (ENERGY STAR)
- the circuit voltage the unit is certified on and the most current it draws
What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
What size heat pump water heater do I need?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All heat pump water heaters
Electric tanks that file a UEF of 2.0 or more — the registry has no separate heat pump type, so this site draws the line there.
-
Every Richmond model on file
What this brand files, by heater type.
UEF 4.07 · Grade B Price it on your ZIP
This site calculated the 1,219 kWh figure; the registry does not list it. It combines the model's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the high draw pattern. For this model, the UEF is 4.07. The registry data come from the DOE's Compliance Certification Database (CCD), retrieved 2026-09-19. The figure holds only at that test draw. A household that uses more or less hot water will use more or less electricity. Within its class, the unit is in the lowest quarter for energy use. The 87 kWh gap is how far it sits from the class median. The page on how the annual energy and cost are calculated sets out each step.
The high draw pattern stands for a larger household, or one where showers and laundry overlap. For that kind of use, the registry lists a first hour rating, the gallons of hot water available in the first hour from a full tank, of 87 gallons. The rated tank volume is 72 gallons. A plumber or seller checking a replacement can compare these two figures with the unit being removed. To find a unit in the same class, use same-class replacement search by model number. The 14th of 194 ranking covers only electric tank models tested at the high draw pattern. It does not compare this unit with models tested at other draw patterns or using other fuels.
For a smaller household, the 1,219 kWh figure at the high draw pattern does not describe likely use. This page has no annual energy figure for this model at a lower draw, so that value is not available here. The selector by fuel, space and size lists units by those criteria instead. The running cost is not stated in this text. It depends on your own utility electricity tariff applied to the 1,219 kWh figure. The cost calculator for your own ZIP works it out from your rate. The installed price range appears in its own block, with its source and date. It is a modeled range, not a quote.
DOE CCD · 2026-09-19