Richmond PROG40-38U RH62 EC1*
0.58 UEF DOE CCD · 2026-09-19Grade G: where this UEF sits among the 288 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
A gas tank, medium draw pattern (a typical three- or four-person household, about 55 gallons on a busy morning).
Verifying this unit's rating? The Richmond PROG40-38U RH62 EC1*, a gas tank water heater, uses 191 therms of natural gas a year. That figure applies at the medium draw pattern, the standard daily hot-water usage DOE tests against. It is 6 therms above the 185 therms median for the 288 gas tank models at that pattern.
Energy use per year
191 therms a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the natural gas rate where you live.
That is above the median of 185 therms for the 288 models registered in the same heater type and draw pattern; it ranks 231 of 288, lowest energy first.
Solid line: this model (191 therms). Dashed line: the class median.
Min 148 therms Median 185 therms Max 194 therms
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.58 DOE CCD · 2026-09-19 Compared only with other models registered as a gas tank at the medium draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Medium DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 71 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 38 gal DOE CCD · 2026-09-19
What it costs to install
$1,293–$1,862 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
Is a 40-gallon water heater enough?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All gas tank water heaters
Gas-fired storage tanks, every size and draw pattern on file.
-
Every Richmond model on file
What this brand files, by heater type.
UEF 0.58 · Grade G Price it on your ZIP
This site computed the 191 therms figure; the registry itself does not publish it. The calculation combines the registry's UEF, the ratio of hot water delivered to energy used, with the daily hot-water draw set by the DOE test for the medium pattern. For this model the UEF is 0.58, as listed in the DOE Compliance Certification Database, retrieved 2026-09-19. The medium draw pattern represents a typical household of moderate size with a busy morning of use. The figure therefore describes the test day, not a specific home. A household that draws more hot water than the test assumes will use more gas than 191 therms a year. One that draws less will use less. The full steps are set out in how the annual cost is calculated.
Against its class, this model ranks 231st for lowest energy use among the 288 gas tank models at the medium draw pattern. That puts it in the highest quarter of the class for energy use, at 6 therms a year above the class median. On capacity, the registry lists a first hour rating, the gallons of hot water available in the first hour from a full tank, of 71 gallons. The rated volume is 38 gallons. For a plumber or seller confirming a like-for-like swap, these two figures are the capacity check. A household whose busiest hour needs more than 71 gallons is outside what this rating covers. A reader who wants lower gas use at the same draw pattern should know that the models ranked ahead of it use less. To list them, find a same-class replacement by model number.
The running cost is not stated in this text. It depends on your state's average residential gas price, so the page computes it from your ZIP and the 191 therms figure. The same applies to the 6 therms gap from the class median: its cost is known only at your own rate. You can rerun the figure with the cost calculator on your own ZIP. The installed price range sits in its own block with its source and date. It is a modeled installed-cost range, not a quote. Neither block changes the 191 therms figure, which stays fixed at the test's medium draw.
DOE CCD · 2026-09-19