DoesTheMath

LOCHINVAR ATHR-160M 1**

0.95 UEF DOE CCD · 2026-09-19
B

Grade B: where this UEF sits among the 397 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set

A gas tankless unit, high draw pattern (a larger household, or one where showers and laundry overlap).

If you are verifying this rating: the LOCHINVAR ATHR-160M 1**, a gas tankless unit, uses 178 therms of natural gas a year. That figure belongs to the high draw pattern, the standard daily hot-water usage DOE tests against. It sits 4 therms below the 182 therms median of the 397 comparable registered models.


Energy use per year

178 therms a year

Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the natural gas rate where you live.

That is below the median of 182 therms for the 397 models registered in the same heater type and draw pattern; it ranks 45 of 397, lowest energy first.

This model: 178 therms

Solid line: this model (178 therms). Dashed line: the class median.

Min 173 therms Median 182 therms Max 209 therms

DOE CCD · 2026-09-19

Report an issue with this number


What it costs to run where you live

Enter your ZIP to see what this unit costs to run a year at your state’s average natural gas price.


What the registry files

UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
0.95 DOE CCD · 2026-09-19 Compared only with other models registered as a gas tankless unit at the high draw pattern.
Draw Pattern the standard daily usage profile DOE tests the unit against
High DOE CCD · 2026-09-19
Maximum Gallons Per Minute how many gallons a minute it can heat while running continuously
4.8 gal/min DOE CCD · 2026-09-19
On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
2024-02-01 ENERGY STAR · 2026-09-19
Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
No ENERGY STAR · 2026-09-19

What it costs to install

$2,358–$3,405 installed

Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.

Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.

NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01

Report an issue with this number


Safety record

No CPSC recall names this model.

Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.

CPSC · 2026-09-24

Does it fit your space?

Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.

Dimensions (ENERGY STAR)
the unit's filed height, width, depth or tank diameter, in inches
Input voltage and maximum current (ENERGY STAR)
the circuit voltage the unit is certified on and the most current it draws
Vent type and size (ENERGY STAR)
how a gas unit is vented, the vent's diameter and the height of its vent connector
  • Physical footprintEnter your numbers27" H × 17" W × 16" D × 1" ⌀
  • Electrical supplyEnter your numbers5A max
  • Vent compatibilityEnter your numbersPower Vent or Power Direct Vent, 3" or 2" vent, 1" to vent
ENERGY STAR · 2026-09-19

What these figures mean

The 178 therms figure is computed by this site. The registry does not publish it. It combines the registry's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the high draw pattern. This model's UEF is 0.95, from DOE CCD data retrieved 2026-09-19. The result holds only at the federal test's daily draw. A home that uses more or less hot water will have a different yearly total. This page does not have data on how far any one home differs from that draw. The steps are set out in how the annual cost is calculated.

The model ranks 45th lowest in energy use among the 397 gas tankless units registered at the high draw pattern. That rank places it in the lowest quarter of its class, with the gap to the median noted above. The high draw pattern stands for a larger household, or one where showers and laundry overlap. A home of that kind matches the condition behind this figure. The model's maximum flow rate in gallons per minute is 4.8. The registry data does not show whether that covers the fixtures a given home runs at the same time. To check other units in the same class, use the same-class replacement search by model number.

A smaller household that draws less than the federal test's daily volume falls outside the condition behind 178 therms. This page does not state how much energy such a home would use. The class comparison above also applies at the high draw pattern only. The running cost is not given in this text. It depends on your state's average residential natural gas price, so the page computes it from your ZIP. The cost calculator on your own ZIP applies that rate to the 178 therms figure. The installed price range appears in its own block on this page. It is a modeled range with its source and date, not a quote.

DOE CCD · 2026-09-19

How this compares

The closest models in the same class — same fuel, type and draw pattern.


Keep going

UEF 0.95 · Grade B Price it on your ZIP