KWICKSHOT TET115V240

The annual figure is not read directly from the registry. This site computed it from the registry's UEF, the ratio of hot water delivered to energy used, and the DOE test's daily hot-water draw for the very small draw pattern. The UEF for this model is 0.95. The result is 622 kWh of electricity a year, from DOE CCD data retrieved 2026-09-19. The class median is 615 kWh, so this model sits 7 kWh above it. Its rank is 152nd lowest energy use of 271 models, which places it in the second-highest quarter of its class for energy use. The calculation method is documented on its own page.

The very small draw pattern covers small units: a single bathroom, or a point-of-use heater under a sink. The 622 kWh figure applies only to that pattern. The data on this page gives no value for any other draw pattern, so the figure should not be read as this unit's use in a larger household. The listed maximum flow rate in gallons per minute is 1.1. That rating was not used to compute the energy figure. Use above the federal test's daily draw is not described by the data, and the resulting energy value is not available. The water heater selector filters by fuel, space and size, and a same-class replacement can be found by model number.

The running cost is not stated in the text because it depends on the utility electricity tariff at the reader's address. It follows from the annual energy of 622 kWh multiplied by that rate, and the rate differs between utilities. The cost calculator applies the rate for the reader's ZIP to this model's figure. The gap to the class median of 615 kWh is 7 kWh a year, and what that gap costs at the reader's own rate is not computed in this text. The modeled installed-cost range appears in its own block with its source and date. It is a range and not a quote, and its figures are not repeated here.