KWICKSHOT TET065V240

This site calculated the 609 kWh figure; the registry does not publish it. The calculation combines two inputs. One is the model's UEF, the ratio of hot water delivered to energy used, which is 0.97. The other is the DOE test's daily hot-water draw for the very small draw pattern. The registry values come from the DOE CCD, retrieved 2026-09-19. The class here is the 271 models registered as an electric tankless unit at the very small draw pattern. At the test's draw, this model uses 6 kWh less than the class median of 615 kWh. That places it in the lowest quarter of its class for energy use. The data does not show how its use changes at other daily draws, so that is not available here. The steps are set out in how the annual cost is calculated.

The very small draw pattern covers small units: a single bathroom, or a point-of-use heater under a sink. The 609 kWh figure and the rank of 37th of 271 hold only for that usage. The model's maximum flow rate in gallons per minute is 0.6. A household that draws more hot water each day than the test assumes will use more energy than stated. How much more is not available in the data. A home that needs hot water for more than one bathroom is outside the use this pattern describes. To compare units by other needs, the water heater selector by fuel, space and size filters on those terms. To find a match in this same class, use find a same-class replacement by model number.

The page text gives no running cost for this model. The cost of 609 kWh a year at the test's draw depends on your own utility electricity tariff. For that reason, the page computes the cost from your ZIP code. The running cost calculator for your ZIP applies your local electricity rate to this model's annual use. Against a model at the class median, the gap is 6 kWh a year at the test's draw. What that gap is worth depends on your own rate. The modeled installed-cost range appears in its own block, with its source and date. That range is a model, not a quote.