HTP EVG080******

The 5,334 kWh figure is not a registry entry. This site computes it from the registry's UEF, the ratio of hot water delivered to energy used, which is 0.93 for this model. It also uses the DOE test's daily hot-water draw for the high draw pattern. The source is DOE CCD, retrieved 2026-09-19. The class is the 21 models registered as an electric tank your utility can shift to off-peak hours. Their median is 5,392 kWh, and this model sits 58 kWh below it, in the lowest quarter of its class for energy use. The calculation steps are set out in how the annual cost is calculated.

The high draw pattern describes a larger household, or one where showers and laundry overlap, so the 5,334 kWh figure applies to that kind of use. The model's first hour rating, the gallons of hot water available in the first hour from a full tank, is 86 gallons. Its rated volume is 78 gallons. Those are the registry's ratings, and this page does not test whether they cover a specific household's peak demand. A household that draws less or more than the federal test's daily draw will use a different amount of energy, and that amount is not available here. To compare other fuels, spaces or sizes, use the selector by fuel, space and size.

The running cost is not stated in this text because it depends on your own utility electricity tariff. The 5,334 kWh at the high draw pattern is the quantity your rate applies to, and the cost calculator on your own ZIP does that step. The 58 kWh gap to the 5,392 kWh class median is an energy difference, not a cost difference, and its cost value depends on your rate. An installed price range is not published for this model. Its ratings lie outside the range the cost database's model was fitted on, and the range is not stretched past it. To check a same-class alternative, find a replacement by model number.