GSW WATER HEATERS HPACO-45 1**+AXST-50S 1**
3.52 UEF DOE CCD · 2026-09-19Grade B: where this UEF sits among the 426 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tank, medium draw pattern (a typical three- or four-person household, about 55 gallons on a busy morning).
If you are checking the GSW WATER HEATERS HPACO-45 1**+AXST-50S 1**, it uses 923 kWh of electricity a year at the medium draw pattern, the standard daily hot-water usage DOE tests against. That is 2,608 kWh below the 3,531 kWh median of the 426 electric tank models registered at the same draw pattern.
Energy use per year
923 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 3,531 kWh for the 426 models registered in the same heater type and draw pattern; it ranks 70 of 426, lowest energy first.
Solid line: this model (923 kWh). Dashed line: the class median.
Min 773 kWh Median 3,531 kWh Max 3,569 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 3.52 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the medium draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Medium DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 70 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 46 gal DOE CCD · 2026-09-19
- On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
- 2026-02-13 ENERGY STAR · 2026-09-19
- Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
- Yes (CTA-2045-A,CTA-2045-B) ENERGY STAR · 2026-09-19
- Refrigerant and GWP (ENERGY STAR) the refrigerant a heat pump unit uses and its global warming potential, a leak's climate effect relative to carbon dioxide (CO2 = 1)
- R-744 (CO2), GWP 1 ENERGY STAR · 2026-09-19
What it costs to install
$3,030–$4,180 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24Does it fit your space?
Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.
- Compressor operating range (ENERGY STAR)
- the air temperatures around the unit in which its heat pump runs; outside this range the heat pump stops
- Dimensions (ENERGY STAR)
- the unit's filed height, width, depth or tank diameter, in inches
- Input voltage and maximum current (ENERGY STAR)
- the circuit voltage the unit is certified on and the most current it draws
What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
What size heat pump water heater do I need?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All heat pump water heaters
Electric tanks that file a UEF of 2.0 or more — the registry has no separate heat pump type, so this site draws the line there.
-
All CO₂ (R-744) heat pump water heaters
Heat pump models whose ENERGY STAR filing names R-744 (carbon dioxide) as the refrigerant, a global warming potential of 1.
-
Every GSW WATER HEATERS model on file
What this brand files, by heater type.
UEF 3.52 · Grade B Price it on your ZIP
The 923 kWh figure is computed by this site, not published by the registry. It combines the registry's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the medium pattern. For this model the UEF is 3.52, and the source is DOE CCD, retrieved 2026-09-19. The medium draw pattern stands for a typical household of several people with a busy morning of hot-water use. The figure therefore holds at the federal test's draw, not at any particular home's use. How far a real household's use departs from that draw is not available in the data. The steps behind the calculation are set out in how this site calculates annual energy and cost.
Beyond the median gap given above, this unit ranks 70th lowest in energy use of the 426 models in its class. The registry lists a rated volume of 46 gallons. Its first hour rating, the gallons of hot water available in the first hour from a full tank, is 70 gallons. The unit fits a household whose busiest hour stays within those 70 gallons at the medium draw pattern. A household that regularly draws more than 70 gallons in its busiest hour would exceed this rating. To check other units in the same class, use find a same-class replacement by model number or the selector by fuel, space and size.
Running cost is not stated in this text, because it depends on your own utility's electricity tariff. The page computes it from your ZIP by applying your rate to the 923 kWh figure at the medium draw pattern. The same rate applied to the 2,608 kWh gap shows what the class difference means on your bill. Without your rate, that value is unknown, and this text does not estimate it. You can run the figure in the cost calculator on your own ZIP. The installed price appears in its own block with its source and date. It is a modeled installed-cost range, not a quote, and it is kept separate from the energy figures above.
DOE CCD · 2026-09-19