Gridless AYHW50G
3.75 UEF DOE CCD · 2026-09-19Grade A: where this UEF sits among the 426 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tank, medium draw pattern (a typical three- or four-person household, about 55 gallons on a busy morning).
For the Gridless AYHW50G, the medium draw pattern, the standard daily hot-water usage DOE tests against, gives 866 kWh of electricity a year. That is 2,665 kWh below the class median of 3,531 kWh. The class is 426 electric tank models at the same draw pattern.
Energy use per year
866 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 3,531 kWh for the 426 models registered in the same heater type and draw pattern; it ranks 21 of 426, lowest energy first.
Solid line: this model (866 kWh). Dashed line: the class median.
Min 773 kWh Median 3,531 kWh Max 3,569 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 3.75 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the medium draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Medium DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 69 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 47 gal DOE CCD · 2026-09-19
- On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
- 2024-12-18 ENERGY STAR · 2026-09-19
- Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
- Yes (CTA-2045-B) ENERGY STAR · 2026-09-19
- Refrigerant and GWP (ENERGY STAR) the refrigerant a heat pump unit uses and its global warming potential, a leak's climate effect relative to carbon dioxide (CO2 = 1)
- R-134a, GWP 1430 ENERGY STAR · 2026-09-19
- Sound level (ENERGY STAR) how loud the unit is while it runs, in decibels as filed
- 49 dB ENERGY STAR · 2026-09-19
What it costs to install
$3,089–$4,419 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24Does it fit your space?
Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.
- Compressor operating range (ENERGY STAR)
- the air temperatures around the unit in which its heat pump runs; outside this range the heat pump stops
- Dimensions (ENERGY STAR)
- the unit's filed height, width, depth or tank diameter, in inches
- Input voltage and maximum current (ENERGY STAR)
- the circuit voltage the unit is certified on and the most current it draws
What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
What size heat pump water heater do I need?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All heat pump water heaters
Electric tanks that file a UEF of 2.0 or more — the registry has no separate heat pump type, so this site draws the line there.
UEF 3.75 · Grade A Price it on your ZIP
The figure of 866 kWh was computed by this site, not by the registry. It uses the registry's UEF, the ratio of hot water delivered to energy used, which is 3.75 for this model. That value is combined with the DOE test's daily hot-water draw for the medium draw pattern. The source is DOE CCD, retrieved 2026-09-19. Against the class median of 3,531 kWh, this model sits 2,665 kWh lower. Its rank is 21st lowest energy use of 426, in the lowest quarter of its class. Energy figures for other draw patterns are not available here.
The running cost depends on your own electricity rate, so no cost is written in the text. Multiply 866 kWh by your utility's rate per kilowatt-hour to check the yearly figure. The cost calculator on your own ZIP does this for you, and how the annual cost is calculated explains the method. The result stays tied to the medium draw pattern. A household that draws more hot water than the federal test will use more than 866 kWh. One that draws less will use less. The size of that difference is not available in the registry data. The installed price range appears in its own block.
The first hour rating, the gallons of hot water available in the first hour from a full tank, is 69 gallons. The rated volume is 47 gallons. The annual energy figure above is computed from the UEF and the test draw, not from these two values. A household whose peak-hour demand exceeds 69 gallons is not covered by this rating. The energy figure is a test result at the medium draw pattern, not a measurement of your home. To compare units in the same class, use the replacement search by model number or browse all water heater pages.
DOE CCD · 2026-09-19