GE Profile PF50S10FPY01
3.2 UEF DOE CCD · 2026-09-19Grade C: where this UEF sits among the 426 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tank, medium draw pattern (a typical three- or four-person household, about 55 gallons on a busy morning).
Checking this unit's energy figure: GE Profile PF50S10FPY01 uses 1,015 kWh a year at the medium draw pattern, the standard daily hot-water usage DOE tests against. That is 2,516 kWh below the 3,531 kWh median of the 426 electric tank models registered at that draw pattern.
Energy use per year
1,015 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 3,531 kWh for the 426 models registered in the same heater type and draw pattern; it ranks 110 of 426, lowest energy first.
Solid line: this model (1,015 kWh). Dashed line: the class median.
Min 773 kWh Median 3,531 kWh Max 3,569 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 3.2 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the medium draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Medium DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 59 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 50 gal DOE CCD · 2026-09-19
- On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
- 2025-05-27 ENERGY STAR · 2026-09-19
- Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
- Yes (CTA-2045-A,CTA-2045-B) ENERGY STAR · 2026-09-19
- Refrigerant and GWP (ENERGY STAR) the refrigerant a heat pump unit uses and its global warming potential, a leak's climate effect relative to carbon dioxide (CO2 = 1)
- R1234YF ENERGY STAR · 2026-09-19
- Sound level (ENERGY STAR) how loud the unit is while it runs, in decibels as filed
- 41 dB ENERGY STAR · 2026-09-19
What it costs to install
$3,123–$3,897 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24Does it fit your space?
Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.
- Compressor operating range (ENERGY STAR)
- the air temperatures around the unit in which its heat pump runs; outside this range the heat pump stops
- Dimensions (ENERGY STAR)
- the unit's filed height, width, depth or tank diameter, in inches
- Input voltage and maximum current (ENERGY STAR)
- the circuit voltage the unit is certified on and the most current it draws
What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
What size heat pump water heater do I need?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All heat pump water heaters
Electric tanks that file a UEF of 2.0 or more — the registry has no separate heat pump type, so this site draws the line there.
-
All 120-volt plug-in heat pump water heaters
Heat pump models whose ENERGY STAR filing lists a 120 V input — the kind that can run from a standard outlet instead of a new 240 V circuit.
-
Every GE Profile model on file
What this brand files, by heater type.
UEF 3.2 · Grade C Price it on your ZIP
The registry lists a UEF, the ratio of hot water delivered to energy used, of 3.2 for this model. The registry does not publish annual energy, so this site computed 1,015 kWh from that UEF and the DOE test's daily hot-water draw for the medium draw pattern. The figure applies only to that draw pattern and to electricity. It is not a measurement of any particular home. Among the 426 electric tank models registered at this pattern, the model ranks 110th lowest of 426 for energy use, in the second-lowest quarter of its class. The gap to the 3,531 kWh median is 2,516 kWh, with this model below it. Source: DOE CCD, retrieved 2026-09-19.
The first hour rating, the gallons of hot water available in the first hour from a full tank, is 59 gallons, and the rated volume is 50 gallons. The 1,015 kWh figure suits a household whose hot-water use resembles the medium draw pattern, which stands for a typical household on a busy morning. It does not describe a household with a heavier draw, and this page has no annual figure for the other draw patterns. A reader whose busiest-hour demand exceeds 59 gallons cannot treat this figure as a sign of enough hot water. To compare by fuel, space and size, use the water heater selector, or find a same-class replacement by model number.
Running cost is not written here because it depends on your own electricity rate. Multiplying 1,015 kWh by your price per kilowatt-hour gives a first estimate at the medium draw pattern. A home that uses more or less hot water than the test's daily draw will differ from it. The cost calculator applies the utility tariff for your ZIP to this model's figure, and the annual cost methodology explains how the calculation works. The modeled installed-cost range appears in its own block with its source and date. It is a modeled range, not a quote, and this text does not repeat it. The 2,516 kWh gap to the class median is stated in energy, so converting it to cost needs the same rate.
DOE CCD · 2026-09-19