FRIEDRICH PROPH50 T2 RH375-SO
3.88 UEF DOE CCD · 2026-09-19Grade A: where this UEF sits among the 426 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tank, medium draw pattern (a typical three- or four-person household, about 55 gallons on a busy morning).
If you are checking the FRIEDRICH PROPH50 T2 RH375-SO, this electric tank uses 837 kWh of electricity a year. That figure holds at the medium draw pattern, the standard daily hot-water usage DOE tests against. It sits 2,694 kWh below the class median of 3,531 kWh, ranking 5th lowest in energy use of 426 comparable models.
Energy use per year
837 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 3,531 kWh for the 426 models registered in the same heater type and draw pattern; it ranks 5 of 426, lowest energy first.
Solid line: this model (837 kWh). Dashed line: the class median.
Min 773 kWh Median 3,531 kWh Max 3,569 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 3.88 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the medium draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Medium DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 67 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 45 gal DOE CCD · 2026-09-19
- On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
- 2024-06-24 ENERGY STAR · 2026-09-19
- Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
- No ENERGY STAR · 2026-09-19
- Refrigerant and GWP (ENERGY STAR) the refrigerant a heat pump unit uses and its global warming potential, a leak's climate effect relative to carbon dioxide (CO2 = 1)
- R-134a, GWP 1430 ENERGY STAR · 2026-09-19
What it costs to install
$3,039–$4,530 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24Does it fit your space?
Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.
- Compressor operating range (ENERGY STAR)
- the air temperatures around the unit in which its heat pump runs; outside this range the heat pump stops
- Dimensions (ENERGY STAR)
- the unit's filed height, width, depth or tank diameter, in inches
- Input voltage and maximum current (ENERGY STAR)
- the circuit voltage the unit is certified on and the most current it draws
What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
What size heat pump water heater do I need?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All heat pump water heaters
Electric tanks that file a UEF of 2.0 or more — the registry has no separate heat pump type, so this site draws the line there.
-
Every FRIEDRICH model on file
What this brand files, by heater type.
UEF 3.88 · Grade A Price it on your ZIP
This site computed the 837 kWh figure; the registry does not list it. The calculation combines the registry's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the medium draw pattern. For this model the UEF is 3.88, taken from the DOE Compliance Certification Database (CCD) and retrieved 2026-09-19. The yearly figure therefore applies only at the federal test's daily draw. A household drawing more hot water than the test assumes will use more electricity, and one drawing less will use less. The registry does not report how this unit performs at other daily draws, so that figure is not available here. The steps are set out on the page explaining how the annual cost is calculated.
The registry lists a rated volume of 45 gallons for this unit. Its first hour rating, the gallons of hot water available in the first hour from a full tank, is 67 gallons. These figures come from the same registry entry as the UEF. They place the model among the 426 electric tanks registered at the medium draw pattern. The comparison therefore fits readers who need a like-for-like figure within this class. A household whose busiest hour needs more than 67 gallons falls outside what this rating covers. The registry gives no figure beyond it. To check other models in the same class, use find a same-class replacement by model number. For a different fuel or space, start from the selector by fuel, space and size.
The running cost is not stated in this text. It depends on your own utility's electricity tariff, which this page does not know in advance. The page applies your rate to the 837 kWh yearly figure at the medium draw pattern once you enter your ZIP in the cost calculator on your own ZIP. The 2,694 kWh gap to the class median converts to a cost difference the same way, at your rate and at the test's daily draw. The installed-cost range appears in its own block, with its source and date. That range is modeled, not a quote, and this text does not restate it. Real-world energy use for this model is not recorded in the registry, so only the test-based figure is available.
DOE CCD · 2026-09-19