FRIEDRICH PROG50S-40U RH60 EC1*
0.63 UEF DOE CCD · 2026-09-19Grade G: where this UEF sits among the 414 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
A gas tank, high draw pattern (a larger household, or one where showers and laundry overlap).
If you are checking this FRIEDRICH PROG50S-40U RH60 EC1* against its listing, it uses 269 therms of natural gas a year at the high draw pattern, the standard daily hot-water usage DOE tests against. That is 9 therms above the class median of 260 therms among 414 gas tank models.
Energy use per year
269 therms a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the natural gas rate where you live.
That is above the median of 260 therms for the 414 models registered in the same heater type and draw pattern; it ranks 320 of 414, lowest energy first.
Solid line: this model (269 therms). Dashed line: the class median.
Min 188 therms Median 260 therms Max 277 therms
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.63 DOE CCD · 2026-09-19 Compared only with other models registered as a gas tank at the high draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- High DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 85 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 48 gal DOE CCD · 2026-09-19
What it costs to install
$1,732–$2,981 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
Is a 50-gallon water heater enough?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All gas tank water heaters
Gas-fired storage tanks, every size and draw pattern on file.
-
Every FRIEDRICH model on file
What this brand files, by heater type.
UEF 0.63 · Grade G Price it on your ZIP
The registry lists a UEF, the ratio of hot water delivered to energy used, of 0.63 for this model. This site combined that UEF with the DOE test's daily hot-water draw for the high draw pattern, which gives 269 therms of natural gas a year. The registry does not publish that annual figure itself. The site computed it from DOE CCD data retrieved 2026-09-19. The figure applies only at the federal test's draw, so a home that draws more or less hot water will use a different amount, and that amount is not available here. The steps behind the calculation are set out on the methodology for the annual cost page.
This model is compared with the 414 models registered as a gas tank at the high draw pattern. Its energy use ranks 320th lowest of 414, which puts it in the highest quarter of its class for energy use. Its 269 therms is 9 therms above the class median of 260 therms. The high draw pattern describes a larger household, or one where showers and laundry overlap. The first hour rating, the gallons of hot water available in the first hour from a full tank, is 85 gallons, and the rated volume is 48 gallons. A reader whose priority is lower gas use will find other models in this class below the median. A same-class replacement by model number can be looked up for comparison.
The running cost is not written in the text because it depends on your state's average residential gas price. The page computes it from your ZIP, applied to the 269 therms at the high draw pattern. The same rate also sets what the 9 therms gap above the 260 therms class median costs over a year. Enter your ZIP in the cost calculator for your own rate to see both. The installed price range appears in its own block on this page, with its source and date. It is a modeled range, not a quote, and it is not repeated here.
DOE CCD · 2026-09-19