FRIEDRICH PROE38 S2 RH93 SB-LO
0.93 UEF DOE CCD · 2026-09-19Grade G: where this UEF sits among the 163 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tank, low draw pattern (a one- or two-person household).
If you are checking this unit against the registry, here is its figure. FRIEDRICH PROE38 S2 RH93 SB-LO uses 2,413 kWh of electricity a year at the low draw pattern, the standard daily hot-water usage DOE tests against. That is 26 kWh below the class median of 2,439 kWh.
Energy use per year
2,413 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is below the median of 2,439 kWh for the 163 models registered in the same heater type and draw pattern; it ranks 9 of 163, lowest energy first.
Solid line: this model (2,413 kWh). Dashed line: the class median.
Min 724 kWh Median 2,439 kWh Max 2,550 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.93 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the low draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Low DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 42 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 35 gal DOE CCD · 2026-09-19
What it costs to install
$1,583–$1,994 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
Is a 30-gallon water heater enough?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All electric resistance tank water heaters
Electric tanks that file a UEF below 2.0 — heated by elements, not a heat pump.
-
Every FRIEDRICH model on file
What this brand files, by heater type.
UEF 0.93 · Grade G Price it on your ZIP
The registry lists this model with a UEF, the ratio of hot water delivered to energy used, of 0.93. This site computed the annual figure of 2,413 kWh from that UEF and the test's daily hot-water draw. The registry does not publish the annual figure itself. The source is DOE CCD, retrieved 2026-09-19, and the fuel is electricity. The model is an electric tank with a rated volume of 35 gallons. It ranks 9th lowest in energy use among the 163 electric tank models registered at the low draw pattern. That places it in the lowest quarter of its class. Its use sits 26 kWh below the class median of 2,439 kWh. The page on how the annual cost is calculated covers the method.
The low draw pattern describes a one- or two-person household. The figure of 2,413 kWh applies only to that pattern. The registry data used here gives no energy figure for other draw patterns. This model's first hour rating, the gallons of hot water available in the first hour from a full tank, is 42 gallons. A household that needs more hot water in one hour than 42 gallons is outside what this rating describes. The class median of 2,439 kWh applies to the same low draw pattern, so the comparison holds only there. This page does not judge whether the rated volume suits a given home. Size and fuel options can be compared with the water heater selector.
The running cost is not stated here because it depends on your own electricity rate. Multiplying 2,413 kWh by your rate per kWh gives a yearly figure for the low draw pattern only. The cost calculator on your own ZIP does that step for you. The installed price range appears in its own block on this page, with its source and date. It is a modeled range, not a quote. Actual use differs from 2,413 kWh when a household's hot-water draw differs from the federal test's. The 26 kWh gap to the class median of 2,439 kWh comes from test conditions, not from measurement in any home. To look for another model in the same class, use the same-class replacement search by model number.
DOE CCD · 2026-09-19