FRIEDRICH PROE30 T2 RH95
0.92 UEF DOE CCD · 2026-09-19Grade G: where this UEF sits among the 163 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
An electric tank, low draw pattern (a one- or two-person household).
Checking the FRIEDRICH PROE30 T2 RH95 electric tank? At the low draw pattern, the standard daily hot-water usage DOE tests against for a one- or two-person household, it uses 2,439 kWh a year. That equals the class median of 2,439 kWh, a difference of 0 kWh.
Energy use per year
2,439 kWh a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.
That is equal to the median of 2,439 kWh for the 163 models registered in the same heater type and draw pattern; it ranks 19 of 163, lowest energy first.
Solid line: this model (2,439 kWh). Dashed line: the class median.
Min 724 kWh Median 2,439 kWh Max 2,550 kWh
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.92 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the low draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- Low DOE CCD · 2026-09-19
- First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
- 44 gal DOE CCD · 2026-09-19
- Rated Storage Volume the tank size in gallons
- 27 gal DOE CCD · 2026-09-19
What it costs to install
$1,461–$1,577 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
Is a 30-gallon water heater enough?
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All electric resistance tank water heaters
Electric tanks that file a UEF below 2.0 — heated by elements, not a heat pump.
-
Every FRIEDRICH model on file
What this brand files, by heater type.
UEF 0.92 · Grade G Price it on your ZIP
The figure of 2,439 kWh is electricity, and this site computed it, not the registry. It combines the registry's UEF, the ratio of hot water delivered to energy used, of 0.92 with the DOE test's daily hot-water draw for the low draw pattern. The figure applies only at that draw. It does not describe any other draw pattern, and this page gives no figure for one. The energy data comes from DOE CCD, retrieved 2026-09-19. The methodology page explains how the annual figure is calculated from these inputs.
The comparison group is the 163 models registered as an electric tank at the low draw pattern. This unit ranks 19th lowest energy use of 163, which places it in the lowest quarter of its class. Its 2,439 kWh equals the class median of 2,439 kWh, so the difference from the median is 0 kWh. Both statements come from the data as supplied. The data does not state how many models share this exact value, so the rank and the median match should be read as two separate facts about the same figure. Neither one says anything about how the unit performs at a heavier draw.
The figure fits the situation it was computed for: a one- or two-person household on the low draw pattern. The unit has a first hour rating, the gallons of hot water available in the first hour from a full tank, of 44 gallons and a rated volume of 27 gallons. The data does not show whether those values meet the needs of a larger household. Running cost depends on your own utility electricity tariff, so no cost is written here. Enter your ZIP in the cost calculator to apply your rate to 2,439 kWh. To compare against similar units, find a same-class replacement by model number. The modeled installed-cost range appears in its own block on the page.
DOE CCD · 2026-09-19