CAMPLUX JSLG44-26VE1(2")
0.92 UEF DOE CCD · 2026-09-19Grade C: where this UEF sits among the 397 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set
A gas tankless unit, high draw pattern (a larger household, or one where showers and laundry overlap).
If you are checking the CAMPLUX JSLG44-26VE1(2"), a gas tankless unit, it uses 184 therms of natural gas a year. That figure belongs to the high draw pattern, the standard daily hot-water usage DOE tests against. It sits 2 therms above the class median of 182 therms, ranking 207th lowest energy use of 397.
Energy use per year
184 therms a year
Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the natural gas rate where you live.
That is above the median of 182 therms for the 397 models registered in the same heater type and draw pattern; it ranks 207 of 397, lowest energy first.
Solid line: this model (184 therms). Dashed line: the class median.
Min 173 therms Median 182 therms Max 209 therms
What it costs to run where you live
What the registry files
- UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
- 0.92 DOE CCD · 2026-09-19 Compared only with other models registered as a gas tankless unit at the high draw pattern.
- Draw Pattern the standard daily usage profile DOE tests the unit against
- High DOE CCD · 2026-09-19
- Maximum Gallons Per Minute how many gallons a minute it can heat while running continuously
- 4.1 gal/min DOE CCD · 2026-09-19
What it costs to install
$2,216–$3,239 installed
Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.
Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.
NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01Safety record
No CPSC recall names this model.
Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.
CPSC · 2026-09-24What these figures mean
How this compares
The closest models in the same class — same fuel, type and draw pattern.
Keep going
How every figure on this page is calculated
-
Find what replaces your water heater
Enter the model number off your old unit and see what is on file today, with the yearly cost difference.
-
Find a water heater that fits
Three questions — fuel, hot water need, install space — narrow every model on file to the ones that fit.
-
What a water heater costs to run
Prices a unit's efficiency against your own utility's filed tariff for your ZIP code.
-
How to size a tankless water heater by GPM
Answered from what models in this size actually file.
-
Water heaters
Every model on file with the Department of Energy, by heater type.
-
All gas tankless water heaters
Gas-fired instantaneous units, sized by flow rate rather than tank gallons.
UEF 0.92 · Grade C Price it on your ZIP
This site computed the 184 therms figure; the registry did not publish it. The calculation combines the registry's UEF, the ratio of hot water delivered to energy used, with the DOE test's daily hot-water draw for the high draw pattern. For this model the UEF is 0.92. The source is the DOE CCD, retrieved 2026-09-19. The figure therefore holds at the federal test's daily draw, not at any one home's actual usage. A household drawing less hot water than the test assumes would use less gas than 184 therms. A household drawing more would use more. This page has no data on how far real usage differs from the test in a given home. The steps behind the conversion are set out in how the annual cost is calculated.
The high draw pattern stands for a larger household, or one where showers and laundry overlap. A household that uses less hot water falls under a different draw pattern, so the 184 therms figure does not describe it. The unit's maximum flow rate in gallons per minute is 4.1, as registered. This page has no data on how that rate changes with incoming water temperature. The comparison group is the 397 models registered as a gas tankless unit at the high draw pattern. Within that group, this model sits in the second-highest quarter for energy use. Its gap above the 182 therms median is 2 therms, the full difference the data shows. To compare models below that median, use the selector by fuel, space and size or find a same-class replacement by model number.
This text does not give a running cost. The cost depends on the reader's state average residential gas price, so the page computes it from the reader's ZIP. The same 184 therms leads to a different yearly cost in each state, and no single national figure applies. At any one gas price, this model's yearly gas use is 2 therms above a model at the class median of 182 therms. Its cost follows that same gap. The cost calculator on your own ZIP shows the figure for this model at the high draw pattern. The installed price range appears in its own block on this page, with its source and date. That range is a modeled installed-cost range, not a quote.
DOE CCD · 2026-09-19