BRADFORD WHITE URG2DV50S*N-***

The figure of 269 therms is a calculated value, not one printed in the registry. This site derived it from the registry's UEF, the ratio of hot water delivered to energy used, of 0.63, and the DOE test's daily hot-water draw for the high draw pattern. The source data is DOE CCD, retrieved 2026-09-19. Against the 414 models registered as a gas tank at the high draw pattern, this model has the 320th lowest energy use, which places it in the highest quarter of its class for energy use. Its figure is 9 therms above the class median of 260 therms. The steps behind the calculation are on the methodology page.

The high draw pattern describes a larger household, or one where showers and laundry overlap, so this figure applies to readers with that kind of use. The model has a first hour rating, the gallons of hot water available in the first hour from a full tank, of 78 gallons, and a rated volume of 47 gallons. The site's energy calculation does not use those two values. The figure does not apply to a lower-use household, and energy use for other draw patterns is not available on this page. Readers who put energy use first should note the 9 therms gap to the class median of 260 therms. To compare by fuel, space and size, use the water heater selector.

The running cost is not written in this text because it depends on the state average residential gas price where you live. Applying your own gas price to 269 therms gives the yearly gas cost at the high draw pattern. Applying the same price to the 9 therms gap gives the yearly difference from the class median. The cost calculator does this from your ZIP. The modeled installed-cost range appears in its own block on the page, with its source and date. It is a modeled range, not a quote, and it is not repeated here. To look for a same-class alternative, find a replacement by model number. Every comparison on this page rests on the federal test's draw, not on measured use in a home.