DoesTheMath

BRADFORD WHITE RTG-K-199N2

0.95 UEF DOE CCD · 2026-09-19
B

Grade B: where this UEF sits among the 397 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set

A gas tankless unit, high draw pattern (a larger household, or one where showers and laundry overlap).

For a larger household, or one where showers and laundry overlap, BRADFORD WHITE RTG-K-199N2 uses 178 therms of natural gas a year at the high draw pattern, the standard daily hot-water usage DOE tests against. That is 4 therms below the 182 therms class median.


Energy use per year

178 therms a year

Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the natural gas rate where you live.

That is below the median of 182 therms for the 397 models registered in the same heater type and draw pattern; it ranks 45 of 397, lowest energy first.

This model: 178 therms

Solid line: this model (178 therms). Dashed line: the class median.

Min 173 therms Median 182 therms Max 209 therms

DOE CCD · 2026-09-19

Report an issue with this number


What it costs to run where you live

Enter your ZIP to see what this unit costs to run a year at your state’s average natural gas price.


What the registry files

UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
0.95 DOE CCD · 2026-09-19 Compared only with other models registered as a gas tankless unit at the high draw pattern.
Draw Pattern the standard daily usage profile DOE tests the unit against
High DOE CCD · 2026-09-19
Maximum Gallons Per Minute how many gallons a minute it can heat while running continuously
5.4 gal/min DOE CCD · 2026-09-19
On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
2018-07-01 ENERGY STAR · 2026-09-19
Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
No ENERGY STAR · 2026-09-19

What it costs to install

$2,358–$3,405 installed

Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.

Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.

NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01

Report an issue with this number


Safety record

No CPSC recall names this model.

Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.

CPSC · 2026-09-24

Does it fit your space?

Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.

Dimensions (ENERGY STAR)
the unit's filed height, width, depth or tank diameter, in inches
Input voltage and maximum current (ENERGY STAR)
the circuit voltage the unit is certified on and the most current it draws
Vent type and size (ENERGY STAR)
how a gas unit is vented, the vent's diameter and the height of its vent connector
  • Physical footprintEnter your numbers32" H × 19" W × 10" D
  • Electrical supplyEnter your numbers2.7A max
  • Vent compatibilityEnter your numbersDirect Vent, 2" vent
ENERGY STAR · 2026-09-19

What these figures mean

The figure of 178 therms is computed by this site, not published by the registry. It combines the registry's UEF, the ratio of hot water delivered to energy used, which is 0.95 for this model, with the DOE test's daily hot-water draw for the high draw pattern. It applies to natural gas and to that test draw only. A household that uses more or less hot water than the test will use a different amount, and this page has no figure for other draw patterns. The registry data was retrieved from DOE CCD on 2026-09-19. The calculation steps are set out in how the annual cost is calculated.

Among the 397 models registered as a gas tankless unit at the high draw pattern, this model has the 45th lowest energy use, which puts it in the lowest quarter of its class. The class median is 182 therms, and this model sits 4 therms below it. That comparison holds at the test draw only. The unit suits a larger household, or one where showers and laundry overlap, because the figure was produced for that usage. It does not describe a household with a much lighter draw. The maximum flow rate in gallons per minute is 5.4. Whether that covers several fixtures running together in a given home is not something this registry data shows.

The running cost is not written here because it depends on your state's average residential gas price. Multiplying 178 therms by your own rate gives the yearly gas cost at the test draw, and the cost calculator for your own ZIP does this for you. A household whose actual hot-water use differs from the high draw pattern will see a different result. The modeled installed-cost range appears in its own block on the page, with its source and date, and is not a quote. If you need another unit in the same class as RTG-K-199N2, you can find a same-class replacement by model number. This page does not compare the 397 models on price.

DOE CCD · 2026-09-19

How this compares

The closest models in the same class — same fuel, type and draw pattern.


Keep going

UEF 0.95 · Grade B Price it on your ZIP