DoesTheMath

BRADFORD WHITE RE2HP80**-1NCTT

4 UEF DOE CCD · 2026-09-19
B

Grade B: where this UEF sits among the 194 models in its class, lowest (G) to highest (A). A position, not an official label. How the grade is set

An electric tank, high draw pattern (a larger household, or one where showers and laundry overlap).

BRADFORD WHITE RE2HP80**-1NCTT uses 1,240 kWh a year at the high draw pattern, the standard daily hot-water usage DOE tests against. That is 66 kWh below the 1,306 kWh class median. It ranks 30th lowest in energy use among 194 electric tank models at the same draw pattern.


Energy use per year

1,240 kWh a year

Computed by this site from the registry's UEF and the federal test's daily hot-water draw for this draw pattern. What it costs depends on the electricity rate where you live.

That is below the median of 1,306 kWh for the 194 models registered in the same heater type and draw pattern; it ranks 30 of 194, lowest energy first.

This model: 1,240 kWh

Solid line: this model (1,240 kWh). Dashed line: the class median.

Min 1,002 kWh Median 1,306 kWh Max 5,334 kWh

DOE CCD · 2026-09-19

Report an issue with this number


What it costs to run where you live

Enter your ZIP to see what this unit costs to run a year on your own utility’s electricity rate.


What the registry files

UEF (Uniform Energy Factor) how much hot water you get for each unit of energy the heater uses
4 DOE CCD · 2026-09-19 Compared only with other models registered as an electric tank at the high draw pattern.
Draw Pattern the standard daily usage profile DOE tests the unit against
High DOE CCD · 2026-09-19
First Hour Rating how many gallons of hot water the unit can deliver in one hour, starting from a full tank
88 gal DOE CCD · 2026-09-19
Rated Storage Volume the tank size in gallons
75 gal DOE CCD · 2026-09-19
On the market since (ENERGY STAR) the date the manufacturer told ENERGY STAR the model went on sale
2025-07-16 ENERGY STAR · 2026-09-19
Connected / demand response (ENERGY STAR) whether the unit can take signals from your utility to shift when it heats, and by which standard (such as CTA-2045)
No ENERGY STAR · 2026-09-19
Refrigerant and GWP (ENERGY STAR) the refrigerant a heat pump unit uses and its global warming potential, a leak's climate effect relative to carbon dioxide (CO2 = 1)
R-134a, GWP 1430 ENERGY STAR · 2026-09-19

What it costs to install

$4,026–$4,933 installed

Not a quote — a modeled range of what installers have charged for this class of unit; your price will vary with labor rates, access, and local code requirements.

Escalation indexes: equipment (BLS PPI) latest available: August 2026; labor (BLS ECI) latest available: April 2026 to June 2026.

NLR REMDB (BLS PPI/ECI escalated) · 2026-04-01

Report an issue with this number


Safety record

No CPSC recall names this model.

Checked against the CPSC recall database. CPSC does not publish a model-level match for this product category, so this list is curated by hand from the manufacturer's recall filings.

CPSC · 2026-09-24

Does it fit your space?

Enter your own numbers below — this compares them to what ENERGY STAR publishes for this model, it does not tell you what to buy.

Compressor operating range (ENERGY STAR)
the air temperatures around the unit in which its heat pump runs; outside this range the heat pump stops
Dimensions (ENERGY STAR)
the unit's filed height, width, depth or tank diameter, in inches
Input voltage and maximum current (ENERGY STAR)
the circuit voltage the unit is certified on and the most current it draws
  • Ambient temperatureEnter your numbers37°F min
  • Physical footprintEnter your numbers22" ⌀
  • Electrical supplyEnter your numbers240V, 19A max
ENERGY STAR · 2026-09-19

What these figures mean

The figure of 1,240 kWh was computed by this site, not the registry. It combines the registry's UEF, the ratio of hot water delivered to energy used, with the daily hot-water draw of the DOE test. The registry lists a UEF of 4 for this model. The condition is the high draw pattern, with electricity as the fuel. The source is DOE CCD, retrieved 2026-09-19. A household that draws more or less hot water than the test assumes will see a different annual figure, and this page does not estimate it. The methodology page explains the calculation.

Against its class, this model sits 66 kWh below the median of 1,306 kWh. That places it in the lowest quarter of its class for energy use, at 30th lowest of 194. The comparison covers only electric tank models at the high draw pattern. It says nothing about models tested at other draw patterns. The first hour rating, the gallons of hot water available in the first hour from a full tank, is 88 gallons here. The rated volume is 75 gallons. These figures fit a larger household, or one where showers and laundry overlap. Households whose use is well below the high draw pattern fall outside the condition of this figure. The water heater selector filters by fuel, space and size.

The running cost is not written here, because it depends on your own utility electricity tariff. Multiplying 1,240 kWh by your rate per kWh gives a yearly figure. The cost calculator does this from your ZIP. The result holds only at the high draw pattern. The 66 kWh gap to the class median is a gap in energy, and its effect on cost depends on the same tariff. To compare against a same-class unit, use the replacement finder with a model number. The installed-cost range appears in its own block on this page, with its source and date, as a modeled range and not a quote.

DOE CCD · 2026-09-19

How this compares

The closest models in the same class — same fuel, type and draw pattern.


Keep going

UEF 4 · Grade B Price it on your ZIP