Rheem XE38S06ST38U1 vs U.S. CRAFTMASTER ENL-40 1**: which uses less energy?
At the low draw pattern the Rheem XE38S06ST38U1 uses 2,466 kWh a year and the U.S. CRAFTMASTER ENL-40 1** 2,522 — 55 kWh (2%) less, about 554 kWh over ten years. Both are filed as an electric tank, so the comparison holds. Enter your ZIP below to price the difference.
Side by side
Compared within one class only: models filed as an electric tank at the low draw pattern.
| Figure | Rheem XE38S06ST38U1 | U.S. CRAFTMASTER ENL-40 1** |
|---|---|---|
| UEF (Uniform Energy Factor) | 0.91 (better) | 0.89 |
| Energy use per year (kWh) | 2,466 (better) | 2,522 |
| First hour rating (gal) | 49 | 50 |
| Rated storage volume (gal) | 35 | 35 |
| Installed cost range | not published | not published |
| ENERGY STAR certified | not matched | not matched |
What it costs to run
Reliability
Not published: Reliability, failure rates and each model’s actual warranty term.
The registries these figures come from certify energy performance under a federal test; none of them records how long a unit lasts or how often it fails, so this page does not rank the two on reliability.
What is here instead:
- The filed efficiency, capacity and tank size of both models, side by side below.
- The actual warranty term is printed in each model’s documentation, not in any registry.
Which should you pick?
- Pick the Rheem XE38S06ST38U1 if running cost matters most: it uses 55 kWh less a year on the same test.
- Pick the U.S. CRAFTMASTER ENL-40 1** if you need more hot water in your busiest hour: it lists a first hour rating of 50 gallons against 49.
- Neither if your household's busiest hour needs more than 50 gallons of hot water — neither lists more. Check whether a 30-gallon heater is enough.
Each model on its own
-
Rheem XE38S06ST38U1
Its filed figures, class position and running cost on your ZIP.
-
U.S. CRAFTMASTER ENL-40 1**
Its filed figures, class position and running cost on your ZIP.