DoesTheMath

RELIANCE WATER HEATERS FPTU-66 1** vs STATE HPTU-66N 1**: which uses less energy?

At the high draw pattern the STATE HPTU-66N 1** uses 1,438 kWh a year and the RELIANCE WATER HEATERS FPTU-66 1** 1,451 — 13 kWh (1%) less, about 126 kWh over ten years. Both are filed as an electric tank, so the comparison holds. Enter your ZIP below to price the difference.

Side by side

Compared within one class only: models filed as an electric tank at the high draw pattern.

Filed and computed figures
RELIANCE WATER HEATERS FPTU-66 1** STATE HPTU-66N 1**
UEF (Uniform Energy Factor) 3.42 3.45 (better)
Energy use per year (kWh) 1,451 1,438 (better)
First hour rating (gal) 79 79
Rated storage volume (gal) 67 67
Installed cost range $3,699–$4,278 $3,703–$4,308
ENERGY STAR certified yes yes
Refrigerant R-134a, GWP 1430 R-134a, GWP 1430
On the market since 2019-04-05 2019-04-05
DOE CCD · 2026-09-19

What it costs to run

RELIANCE WATER HEATERS FPTU-66 1**: 1,451 kWh a year STATE HPTU-66N 1**: 1,438 kWh a year

RELIANCE WATER HEATERS FPTU-66 1** — 1,451 kWh a year STATE HPTU-66N 1** — 1,438 kWh a year

STATE HPTU-66N 1** is 13 kWh a year lower than RELIANCE WATER HEATERS FPTU-66 1**.

DOE CCD · 2026-09-19

Report an issue with this number

Enter your ZIP to price both units on the same rate where you live.

Reliability

Not published: Reliability, failure rates and each model’s actual warranty term.

The registries these figures come from certify energy performance under a federal test; none of them records how long a unit lasts or how often it fails, so this page does not rank the two on reliability.

What is here instead:

  • The filed efficiency, capacity and tank size of both models, side by side below.
  • Both are ENERGY STAR certified, which requires a manufacturer warranty of at least six years; the actual term for each model is not published.
  • Time on the market, as filed with ENERGY STAR: the RELIANCE WATER HEATERS FPTU-66 1** since 2019-04-05, the STATE HPTU-66N 1** since 2019-04-05. A sale date, not a lifespan.

Which should you pick?

  • Pick the STATE HPTU-66N 1** if running cost matters most: it uses 13 kWh less a year on the same test.
  • Pick the RELIANCE WATER HEATERS FPTU-66 1** if it is the one you can get installed sooner or for less — on the filed figures it has no advantage over the STATE HPTU-66N 1**.
  • Neither if your household's busiest hour needs more than 79 gallons of hot water — neither lists more. Check whether a 65-gallon heater is enough.

Each model on its own

Other comparisons

Analytics cookies

We count page views without cookies for everyone, and that counter is what we use to decide what to build. Google Analytics is separate: it uses cookies to record how a page was used, and it loads only if you allow it. Decline and the site works exactly the same. What we collect.