LOCHINVAR GDV-40 3** vs Rheem PROG50-36N RH60 MH DVX: which uses less energy?
At the medium draw pattern the LOCHINVAR GDV-40 3** uses 185 therms a year and the Rheem PROG50-36N RH60 MH DVX 191 — 6 therms (3%) less, about 64 therms over ten years. Both are filed as a gas tank, so the comparison holds. Enter your ZIP below to price the difference.
Side by side
Compared within one class only: models filed as a gas tank at the medium draw pattern.
| Figure | LOCHINVAR GDV-40 3** | Rheem PROG50-36N RH60 MH DVX |
|---|---|---|
| UEF (Uniform Energy Factor) | 0.6 (better) | 0.58 |
| Energy use per year (therms) | 185 (better) | 191 |
| First hour rating (gal) | 64 | 65 |
| Rated storage volume (gal) | 39 | 48 |
| Installed cost range | $1,424–$2,199 | $1,440–$2,230 |
| ENERGY STAR certified | not matched | not matched |
What it costs to run
Reliability
Not published: Reliability, failure rates and each model’s actual warranty term.
The registries these figures come from certify energy performance under a federal test; none of them records how long a unit lasts or how often it fails, so this page does not rank the two on reliability.
What is here instead:
- The filed efficiency, capacity and tank size of both models, side by side below.
- The actual warranty term is printed in each model’s documentation, not in any registry.
Which should you pick?
- Pick the LOCHINVAR GDV-40 3** if running cost matters most: it uses 6 therms less a year on the same test.
- Pick the Rheem PROG50-36N RH60 MH DVX if you need more hot water in your busiest hour: it lists a first hour rating of 65 gallons against 64.
- Neither if your household's busiest hour needs more than 65 gallons of hot water — neither lists more. Check whether a 40-gallon heater is enough.
Each model on its own
-
LOCHINVAR GDV-40 3**
Its filed figures, class position and running cost on your ZIP.
-
Rheem PROG50-36N RH60 MH DVX
Its filed figures, class position and running cost on your ZIP.