DoesTheMath

FRIEDRICH PRO H50 T2 RH310BM vs STATE HPACO-45 1**+AXST-50T 1**: which uses less energy?

At the medium draw pattern the STATE HPACO-45 1**+AXST-50T 1** uses 923 kWh a year and the FRIEDRICH PRO H50 T2 RH310BM 928 — 5 kWh (1%) less, about 53 kWh over ten years. Both are filed as an electric tank, so the comparison holds. Enter your ZIP below to price the difference.

Side by side

Compared within one class only: models filed as an electric tank at the medium draw pattern.

Filed and computed figures
FRIEDRICH PRO H50 T2 RH310BM STATE HPACO-45 1**+AXST-50T 1**
UEF (Uniform Energy Factor) 3.5 3.52 (better)
Energy use per year (kWh) 928 923 (better)
First hour rating (gal) 67 67
Rated storage volume (gal) 45 45
Installed cost range $2,996–$4,150 $2,998–$4,170
ENERGY STAR certified yes yes
Refrigerant R-134a, GWP 1430 R-744 (CO2), GWP 1
On the market since 2020-11-01 2026-02-13
DOE CCD · 2026-09-19

What it costs to run

FRIEDRICH PRO H50 T2 RH310BM: 928 kWh a year STATE HPACO-45 1**+AXST-50T 1**: 923 kWh a year

FRIEDRICH PRO H50 T2 RH310BM — 928 kWh a year STATE HPACO-45 1**+AXST-50T 1** — 923 kWh a year

STATE HPACO-45 1**+AXST-50T 1** is 5 kWh a year lower than FRIEDRICH PRO H50 T2 RH310BM.

DOE CCD · 2026-09-19

Report an issue with this number

Enter your ZIP to price both units on the same rate where you live.

Reliability

Not published: Reliability, failure rates and each model’s actual warranty term.

The registries these figures come from certify energy performance under a federal test; none of them records how long a unit lasts or how often it fails, so this page does not rank the two on reliability.

What is here instead:

  • The filed efficiency, capacity and tank size of both models, side by side below.
  • Both are ENERGY STAR certified, which requires a manufacturer warranty of at least six years; the actual term for each model is not published.
  • Time on the market, as filed with ENERGY STAR: the FRIEDRICH PRO H50 T2 RH310BM since 2020-11-01, the STATE HPACO-45 1**+AXST-50T 1** since 2026-02-13. A sale date, not a lifespan.

Which should you pick?

  • Pick the STATE HPACO-45 1**+AXST-50T 1** if running cost matters most: it uses 5 kWh less a year on the same test.
  • Pick the FRIEDRICH PRO H50 T2 RH310BM if it is the one you can get installed sooner or for less — on the filed figures it has no advantage over the STATE HPACO-45 1**+AXST-50T 1**.
  • Neither if your household's busiest hour needs more than 67 gallons of hot water — neither lists more. Check whether a 40-gallon heater is enough.

Each model on its own

Other comparisons

Analytics cookies

We count page views without cookies for everyone, and that counter is what we use to decide what to build. Google Analytics is separate: it uses cookies to record how a page was used, and it loads only if you allow it. Decline and the site works exactly the same. What we collect.