Fogatti FDG340IN-CS90-NG vs ORBEK HW080: which uses less energy?
At the low draw pattern the Fogatti FDG340IN-CS90-NG uses 93 therms a year and the ORBEK HW080 95 — 1 therms (1%) less, about 12 therms over ten years. Both are filed as a gas tankless unit, so the comparison holds. Enter your ZIP below to price the difference.
Side by side
Compared within one class only: models filed as a gas tankless unit at the low draw pattern.
| Figure | Fogatti FDG340IN-CS90-NG | ORBEK HW080 |
|---|---|---|
| UEF (Uniform Energy Factor) | 0.82 (better) | 0.81 |
| Energy use per year (therms) | 93 (better) | 95 |
| Max flow (GPM) | 2.2 | 2.1 |
| Installed cost range | $1,745–$2,687 | $1,698–$2,632 |
| ENERGY STAR certified | not matched | not matched |
What it costs to run
Reliability
Not published: Reliability, failure rates and each model’s actual warranty term.
The registries these figures come from certify energy performance under a federal test; none of them records how long a unit lasts or how often it fails, so this page does not rank the two on reliability.
What is here instead:
- The filed efficiency, capacity and tank size of both models, side by side below.
- The actual warranty term is printed in each model’s documentation, not in any registry.
Which should you pick?
- Pick the Fogatti FDG340IN-CS90-NG if running cost matters most: it uses 1 therms less a year on the same test.
- Pick the ORBEK HW080 if it is the one you can get installed sooner or for less — on the filed figures it has no advantage over the Fogatti FDG340IN-CS90-NG.
- Neither if you need more than 2.2 GPM at the same time — neither unit lists more. Check how to size a tankless unit by GPM.
Each model on its own
-
Fogatti FDG340IN-CS90-NG
Its filed figures, class position and running cost on your ZIP.
-
ORBEK HW080
Its filed figures, class position and running cost on your ZIP.