AMERICAN STANDARD WATER HEATERS GN50L2-3-* vs LOCHINVAR GDV-50 3**: which uses less energy?
At the high draw pattern the LOCHINVAR GDV-50 3** uses 256 therms a year and the AMERICAN STANDARD WATER HEATERS GN50L2-3-* 260 — 4 therms (2%) less, about 39 therms over ten years. Both are filed as a gas tank, so the comparison holds. Enter your ZIP below to price the difference.
Side by side
Compared within one class only: models filed as a gas tank at the high draw pattern.
| Figure | AMERICAN STANDARD WATER HEATERS GN50L2-3-* | LOCHINVAR GDV-50 3** |
|---|---|---|
| UEF (Uniform Energy Factor) | 0.65 | 0.66 (better) |
| Energy use per year (therms) | 260 | 256 (better) |
| First hour rating (gal) | 78 | 77 |
| Rated storage volume (gal) | 48 | 48 |
| Installed cost range | $1,849–$3,282 | $1,907–$3,432 |
| ENERGY STAR certified | not matched | not matched |
What it costs to run
Reliability
Not published: Reliability, failure rates and each model’s actual warranty term.
The registries these figures come from certify energy performance under a federal test; none of them records how long a unit lasts or how often it fails, so this page does not rank the two on reliability.
What is here instead:
- The filed efficiency, capacity and tank size of both models, side by side below.
- The actual warranty term is printed in each model’s documentation, not in any registry.
Which should you pick?
- Pick the LOCHINVAR GDV-50 3** if running cost matters most: it uses 4 therms less a year on the same test.
- Pick the AMERICAN STANDARD WATER HEATERS GN50L2-3-* if you need more hot water in your busiest hour: it lists a first hour rating of 78 gallons against 77.
- Neither if your household's busiest hour needs more than 78 gallons of hot water — neither lists more. Check whether a 50-gallon heater is enough.
Each model on its own
-
AMERICAN STANDARD WATER HEATERS GN50L2-3-*
Its filed figures, class position and running cost on your ZIP.
-
LOCHINVAR GDV-50 3**
Its filed figures, class position and running cost on your ZIP.